|
Unsurpassed Deposit Clean-up
Port Fuel Injector Deposits form after the engine has been shut down and there is no gasoline flowing through the injectors. During this “hot soak” period the injectors heat up and the gasoline remaining in the injectors degrades and forms deposits. This can happen very quickly with the use of poor quality gasoline and short trip driving. Because the clearances within the injectors are extremely tight and injectors must deliver precise amounts of “atomized” fuel, even small amounts of deposits can cause injectors to malfunction. Fuel flow is reduced and spray patterns are disrupted, decreasing engine efficiency, power and fuel economy, while increasing exhaust emissions.
Intake Valve Deposits form on the intake side or back side of the valves. As deposits increase, they restrict airflow and alter airflow patterns in the cylinder. The deposits disrupt the balanced air/fuel ratio by momentarily absorbing and releasing fuel, and they can cause valve sticking by getting in the way of the valve stem and guide. Deposits also restrict proper seating, and the valves may be burned. Intake valve deposits cause lost engine power, increased emissions, poor engine efficiency and potential valve failure.
Combustion Chamber Deposits form on the top of the pistons and on the cylinder heads. They increase compression and absorb heat during combustion to later release it during the intake cycle. In some engines with tight squish domes, combustion chamber deposits cause the piston to actually hit the cylinder head. This is referred to as combustion chamber deposit interference or “carbon rap.” Combustion chamber deposits also flake off as they get large, and these flakes can get trapped between the valves and valve seat, resulting in compression loss, difficult starting and rough idle.
Higher compression and stored heat cause increased intake fresh charge temperatures and the increased likelihood of pre-ignition “knock” or “pinging” when the fuel spontaneously combusts prior to spark ignition. This increases emissions and may cause engine damage. Many of today’s cars have “knock” sensors that adjust spark timing to prevent knock.
Although audible knock is controlled, power is lost from retarded timing. Higher octane fuels of 4-5 octane numbers can be used to help prevent knock, an effect called “octane requirement increase.” As a vehicle ages, more expensive higher octane fuel is needed to keep it operating at peak performance. By cleaning combustion chamber deposits, knock is controlled, power is restored, fuel economy increases and higher octane fuels are less necessary for peak performance.
Maximum Fuel Economy
AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance.
Recommendations
Treat one full tank of gas up to 20 gallons with one bottle of P.i. For very large gas tanks, partially fill to 40 gallons and treat with two bottles of P.i. Using more than two bottles per treatment is not recommended. Treat gas every 4,000 miles or 100 hours of service. P.i. helps pass emission tests by running one tank of treated fuel through the engine prior to testing. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10 percent ethanol blended gas. Not recommended for two-cycle engines.
DANGER: Combustible. Harmful or fatal if swallowed. Harmful if inhaled. Skin and eye irritant. Read precautions on container before use.
Place Your Order Online Now - click here
Place Orders by Phone
7AM-5PM Central
Toll-Free at:
1-800-777-7094
Important Give Operator Referral
# 1488182
for fastest shipping!
Add Preferred Customer Option to shopping cart for Best Wholesale Pricing! Preferred Customers receive Discounts of 15-25% less than regular catalog pricing!
ORDERING BY PHONE: To become a Preferred Customer simply call 1-800-777-7094, and tell the phone operator you would like to become a Preferred Customer. You will need your charge card number handy when you call. When the operator asks for your Sponsor Number tell them: 1488182 for fastest shipping. That's all there is to it. Now you are entitled to purchase products at wholesale prices. You can also place your order now if you know the quantities and product codes of the items. You will also receive a general packet of information from AMSOIL in the mail and the monthly publication, AMSOIL Action News. Preferred Customers can upgrade their membership to a Dealer at any time.
For personal Assistance choosing your products call:
Toll Free1-877-869-0443 Ask for Jon.
The AMSOIL Product Users Learn of Dealership Opportunity
Most customers become familiar with Amsoil products from friends telling them of their results. Most AMSOIL product users learn that becoming a Preferred Customer would provide cost savings & convenience after they have experienced Amsoil benefits firsthand. Often Preferred Customers become Amsoil Dealers! They found they wanted to share their experience with others, and at an unbelievable cost of 30.00 a year dealership fee, they quickly realize the terrific opportunity at hand!
Sign up as a Dealer through this website and we can help you set up a website to promote your business. Contact us for specific details. info@usasyntheticoil.com
Jon Fast
AMSOIL DISTRIBUTOR
USASynthetic Oil
Belvidere, Il 61008
| 
Newly reformulated AMSOIL P.I. (Performance Improver) provides unsurpassed fuel economy and performance. Today’s fuels vary in quality and additive treat levels. Although a certain level of detergent additive is required by law to be formulated into gasoline, cost restrictions cause refineries to use low quality additives in the lowest additive concentration (LAC), a level insufficient to prevent deposit accumulation. As a result, deposits accumulate on fuel injectors, intake valves and combustion chambers, often within just a few thousand miles, disrupting spray patterns, affecting electronic sensors and causing a multitude of problems.
